Lighting Wall Furnace Pilot

Find the valve located in the heater and turn it to Pilot.

Lighting wall furnace pilot. Steps For Safely Lighting a Gas Wall Heater. The single pole breaker operates the blower motor inside your gas furnace. This maintains gas flow to the pilot until the thermocouple gets hot enough to open the main gas valve.

After waiting for 10 minutes use the following procedure to relight the pilot light. Once the gas has had time to dissipate turn the knob to Pilot Then hold down the Reset button and bring the flame of a long lighter close to the pilot light opening. FAN TYPE VENTED WALL FURNACE WITH STANDING PILOT CONTROL SYSTEM.

Owners Manual Forsaire Counterflow Direct-Vent Gas Wall Furnaces Forsaire Counterflow Direct-Vent Gas Wall Furnaces Model Numbers. Release the valve and light your match. This should light the furnace pilot light.

4007332 Move selector arm to the SET position and light the pilot. Light the Standing Pilot Place the lit match or ignited lighter tip at the pilot while depressing and holding the reset button or depressing the knob as appropriate. The first step is to determine if the issue is in the furnace or the thermostat.

Turn the dial to zero 2. If youre having trouble locating the pilot or thermocouple double-check to make sure your unit actually has a standing pilot light. Standing pilot lights are common in older furnaces but many newer furnaces have intermittent pilot lights or hot surface igniters.

One such example of this is the switch from traditional standing pilot lights to electronic ignitions. Relight the pilot light with the ignition button if your furnace has one. For a test remove the wires from the thermostat and twist them together to bring on the unit.