Lighting Bathroom Zones

Zone 2 requires IPX4 OR double insulated OR low voltage OR be recessed into the ceiling.

Lighting bathroom zones. Different areas in the bathroom like near the tub or shower or in the basin area are the areas that require a lot of consideration on what type of lighting or electrical device or even where to place sockets are limited by a required measure called Ingress Protection or International Protection which is normally referred to as the IP rating. 06m radius around the sink. Zone 2 is an area stretching 06m outside the perimeter of the bath and to a height of 225m from the floor.

Heres the snapshot breakdown of your ZONES and what can live in them. Bathroom Zone 2 Zone 2 is an area stretching 06m outside the perimeter of the bath and to a height of 225m from the floor. Zone 3 Outside Zone.

In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. - For showers over baths. ZONE 1 Outside ZONE 0.

For electrical fittings the bathroom is divided into zones into by the NZ Electrical Code of Practice as below. For bath and shower its a vertical projection of ZONE 0 up to a height of 25M in Australia. Zone 1 for a shower room is 225m from the finished floor level or the height of the fixed shower head from the finished floor level if more than 225m and the width of the shower basin.

All The Best Brands At Affordable Prices - Brilliant Havit Eglo Aeratron Hunter More. Bathroom lighting regulation zones are as follows. Bathrooms have ZONES in the Australian Standards which tell us what lighting can and cant be used within certain distances of water sources.

Lights with IP rating IPx4 or above if showersbaths are communal then this rises to IPx5 or 12V lights or lights recessed into ceiling. Bathroom zone 1 is the area above a bath or shower to a height of 225m from the floor. Zone 0 - This covers interior area of the base of the bath or shower.