How To Add Recessed Lighting To First Floor

Id really like to add some recessed can lights to our first floor.

How to add recessed lighting to first floor. A recessed light fixture consists of three components. Lay it all out before you make any large holes. Use 4 lights Amazon has 10pks.

3 Cut around your pencil lines using a hand-held drywall saw. Drop a weighted string down through the hole in the top plate and tape the end of the cable to it. Now that you have the corners set you need to fill by spacing out the recessed lighting fixtures.

Pull the cable from the power source to the first recessed light and leave approximately 18 inches of wire hanging from the ceiling. If you were to follow this then lights for an 8 foot ceiling would be spaced 4 feet apart. Next you will insert the housing into the ceiling hole.

Repeat this for each light fixture. Slide the light unit into the hole you have cut in the ceiling Choosing Your Recessed Down Lights. Im looking into installing recessed lights on the first floor of a two-story house.

With a 4 hole and the right drill you can drill through the joist to get wires in the next bay. Trace the circle onto the ceiling in every location where you will be installing a light. To install recessed lights locate the main circuit breaker and turn the power off for the room where youre installing the lights.

The cones of light normally cross at least 30 inches from the floor. Housing a cylindrical metal can that houses the light bulb and other parts of the fixture hiding them inside the ceiling. For some reason we seem to have the only house on our street without the can lights.